How to install your own license plates?

Just got a new license plate for your new car? Or did the one on your old car come off? In either case, you need to ask. Generally, the installation is done by a professional of the car industry. However, considering the price already paid for the purchase of a new license plate if you have the right tools, you can also do it yourself. We show you how to do this in the following paragraphs.

What tools should I use to install my license plates?

You don’t need to be a mechanic or a skilled handyman to install a license plate. What we need are simply three tools that will be useful for fixing. We are talking about a drill with a 5 mm drill bit, 4 rivets and a rivet gun. We don’t need anything else! These three will do very well and can be easily found in hardware or car parts stores.

The steps to follow

Now that you have all the equipment with you, you can get right to work. The first thing to do is of course to remove the old plates from the car. To do this, you only need to drill the plates at the level of the rivets that are already installed. Once all the rivets are removed (and you’ll need to check), the plate will come off and you can then move on to installing the new plate. Here is how you should proceed:

  • First, drill 2 mounting holes on your new license plate. Here, you will not have to worry about the location since all plates already come with marks where you can make the holes.
  • Next, you will have to make holes on the car and for that you have to put the plate on the chassis and where you want to place it. Then drill the plate on the right and make sure the hole goes through the plate and the vehicle frame.
  • Once the holes are made, you just have to put the license plate on the frame and fix it with a rivet clip and a rivet. Here, you will have to press hard enough so that the rivet breaks and is fixed on the plate.

After these operations, your license plate is now installed. And finally, you can put a cover on the rim to enhance the aesthetics, but it is not mandatory.

Leave a Reply

Your email address will not be published. Required fields are marked *